How PLA bio-based plastics control drying and degradation
PLA is sensitive to moisture and high temperatures, drying and mild plasticization determine molecular mass and appearance. Material mechanisms, plasticization parameters, risk dia…
PLASTIC MATERIALS & PLASTICIZING
Plastic Materials & Plasticizing
Plasticizing characteristics and screw matching for commodity plastics, engineering plastics, glass fibre, flame-retardant and corrosive materials.
Why isn't UHMWPE suitable for normal plating?
Ultra-high-molecular polyethylene slurry is extremely sticky, and conventional screws are difficult to stabilize and fill. From material mechanics, plasticization parameters, risk…
Safety focus for PFA and FEP fluorinated plastics processing
Fluorinated plastics require clean, corrosive equipment and strict temperature control, and superthermal decomposition products pose safety and corrosive risks. The safety focus of…
TPE and TPR materials plasticized to prevent slippage
The flexible elastic particle friction and softening characteristics are special, and the temperature of the coating mouth and snail friction determine the input. Material mechanis…
How TPU elastics avoid bubbles and glue
TPU wetting, softening scope and viscosity with changes in the system and hardness, and plasticization combines drying and low stay. The material mechanism, plasticization paramete…
Why does LCP LCDs need to be quickly plasticized?
LCP has low viscosity, high orientation and limited stop windows, and plasticization and high-speed filling need to maintain a stable rhythm. Material mechanisms, plasticization pa…
Temperature management for PSU and PESU materials plasticization
PSU and PESU require high-temperature processing and wetting, and equipment temperature control and material stay must be stable. The temperature management of the plasticization o…
How PEI High Temperature Transparency Materials Reduce Internal Stress
PEI is highly heat-resistant and adhesive, with full drying, stable melting temperature and the appropriate symmetric temperature determining transparency and stress. Material mech…
How to control corrosive and corrosive wear during plasticization of PPS materials
The PPS common high-fibre and flame-retarding levels need to be considered together with high temperature plasticization, wear, volatilization and corrosion. Material mechanisms, p…
What equipment conditions are required for PEEK high temperature plastics plastics plastics
PEEK has a high melting point and a high processing temperature, requiring a high heating capacity, temperature control accuracy, grinding resistance to corrosive materials and cle…
100 posts · Page 4 of 10
SCREW & BARREL PRODUCTS
Injection molding screw product rolling display
According to the resin material, filling ratio, equipment model and product requirements, select a more suitable screw and barrel solution.