Core conclusions on the slug selection issue

First, the plastic plate number and filling ratio are identified, then the plastics specifications, product sizes and mass defects are checked, and the long-range ratio, compression ratio, mixing structures and screw material is finalized.

If you don't pick the wrong snail, those problems are common:

1. Poor quality of products

   • It's yellow.: Materials are overcuted or excessively degraded.

   • Bubbles, silver, black.: Unequal plasticization, contamination of residues.

   • Surface stripes, flow marks: Melting unevenness or high volatility.

2. Inefficient production

   • Filling of grievances, extended cycles and even frequent transfers.

   • The flow of materials is unstable and high-speed injections are flight-friendly or lack of materials.

3. Equipment wears fast

   • With the bottling but not the grinding screws, the leaks were severely worn in months.

   • The corrosive material is resistant to corrosion, and the material containing corrosive additives can be corroded and stripped over time.

4. Change, clean.

   • The multiplicity of residues and the lack of a clean colored mother affect the next batch of colours and performances.

In short,The screw is wrong = mass, efficiency, life is lost.I don't know.

Data to be recorded before implementation

• Material integrity number, filling ratio, flame-retarding system, refill ratio and dry condition.
• Note plastics brand, model, screw diameter, voltage, back pressure, turn speed and current screw structure.
• Indicators of product size, wall thickness, appearance or strength, and current adverse phenomena and frequency of occurrence.
• Continuous production cycle, refuelling frequency, machine clean-up method, wear and tear record and planned useful life.

How to validate the adjustment results

It is recommended that the current process baseline be established, followed by a single-variant test model. Each round records the measurement of time, melting temperature, product weight, formation cycle and bad rate, avoiding multiple parameters being changed at the same time to determine the cause. The parameters in the text are used to illustrate design thinking and should not replace material supplier data and on-site safety protocols.

What kind of support is a star-friend screw?

The Starfleet Mechanical Equipment Co. Ltd. (Starfeng) can provide material and situational assessments, screw structural recommendations, base and surface treatment options, non-spectrometric customization and test simulation questions around the pixmap screw selection. The submission of information on raw materials, equipment and products could lead to more targeted programmes.

Ask for customized screws immediately, or check firstNote plastic screw productwithNote Plastic SolutionsI don't know.